8 Criteria to Choose the Best Antivirus Program For Your Needs

There is no best antivirus program in general. You can make the best choice of your antivirus software depending on your goals, your needs and your environment. In order to choose your best antivirus software you should look at vendor information, independent antivirus certifying agencies reviews, as well as other sources. Here are the essential criteria for the right choice.

1. Compatibility
Antivirus program has to be compatible with your PC configuration. Your PC must meet hardware and software requirements of antivirus solution.

2. Range of Protection
Antivirus software should protect your PC from as many threats and on as many viruses as it can: viruses, worms, trojans, spyware, keyloggers, adware, rootkits, password stealers, phishing attacks, spam and others.

3. Effectiveness
Antivirus protection delivery by antivirus program should be effective and efficient. You may find and compare test results released by independent antivirus certifying agencies: Virus Bulletin, AV Comparatives, ISCA Labs, Westcoast Labs and others. If some antivirus solution was scored by these agencies high and consistently near the top, then you really can not go wrong with this top rated antivirus software.

4. Easy Installation
Good antivirus program has a prompt and easy installation. Interface should be clean, easy, and intuitive to use.

5. Easy to Use
Most users want to "install and forget" their antivirus software. So the best antivirus solution should have default configurations acceptable for most users. And at the same time good antivirus program can be easily configured and tweaked by advanced users.

6. Features
The best antivirus programs have the large features set that may include:
– list of compatible versions of Operational systems and platforms,
– amount of used system resources,
– using of proactive protection without false positives and with effective utilizing of system resources,
– availability of laptop battery saving mode,
– bootable rescue disk,
– silent gamer mode, and other available options.

A comprehensive features set adds strength to antivirus solution.

7. Update
The best security solutions have Automatic Update option and automatically perform updates every hour or "as needed updates" to keep virus definitions and program code up to date.

8. Support
The best security programs have a comprehensive online and offline technical support. The program vendor should provide online knowledge base, FAQs, tutorials, user forums. The best sellers provide 24/7 support so you can ask your questions by phone, email or chat at any moment.

The best for your needs antivirus program delivers you the best security and usability with a minimal outlay of your time, money, or your PC system resources.

Posted in general | Comments Off on 8 Criteria to Choose the Best Antivirus Program For Your Needs

Microsoft Access and Medical Private Practice

For physicians medical office software installation could be nerve-wracking, not because they want to avoid electronic medical records, but because the majority of the software packages are too complicated and very expensive for them.

The good news is, you can make your medical office software system uncomplicated and relatively easily maintained with one of the popular database software packages being used today, the Microsoft Access.

Microsoft Access is a relational database system developed by Microsoft. Microsoft Access is one of the easiest and most flexible database management solutions for the medical office and provides data validation and user-friendly features on data entry screens. It has been the dominant lightweight database system used for the last decade and has continued to grow with additional features. Access is a productive and very customizable solution for small medical practices and comes with MS Office (or standalone). However the next step up in a medical environment would be MS SQL Server but small medical offices usually only has need of a lightweight application and the added functionality with MS SQL Server, comes with a heavy price.

With this relational database system you can be up and running in one hour, which means that it is not necessary for your practice to spend lot of money to purchase, configure, update and maintain an SQL Server solution. Microsoft Access includes without any additional costs, points of integration with popular software packages including: Microsoft Word, Excel & Outlook and provides a free runtime version.

MS Access network setup is very easy. A medical office with 2-8 users is up and running within ten minutes, while installation and application maintenance is extremely simple. Virtually any user with a basic knowledge of Microsoft Access can handle all maintenance procedures without the assistance of IT personnel.

Keep also in mind that SQL Server is the flagship database system from Microsoft and it is suitable for use in environments with up to thousands of users. Microsoft Access can handle 2- 8 users and it is limited to 2 GB data storage.

We are convinced that the best way for private medical offices around the world to enter the world of electronic medical records is to purchase a professionally designed but inexpensive and affordable Microsoft Access based software solution.

Posted in general | Comments Off on Microsoft Access and Medical Private Practice

Schedule Slippage – Root Causes

“The single most important task of a project: setting realistic expectations. Unrealistic expectations based on inaccurate estimates are the single largest cause of software failure.”- Futrell, Shafer

Introduction

With global and competitive market, it is very important to launch a product or service in the market on time, ahead of competitors. Definitely, timely launch depends on on-time-completion of the product development projects. Project planning has lots of challenges to overcome in order to finish the project on time – right from schedule predictability, envisioning future/possible risks and coming up with mitigation plans.

This article talks about some of the challenges, often faced in the Software Product Development industry that causes the schedule slippage.

Schedule slippage: Delay in the project completion from its initial estimated date of completion.

Each project plan will have a planned completion date (NRA, RA), and a bounding box or upper limit in schedule. Nowadays, it is a common practice to have three dates associated with any project plan:

  • Non-Risk Adjusted (NRA) date: Project completion date assuming no hurdles – Ideal conditions.
  • Risk Adjusted (RA) date: Project completion date assuming some risks will come on the way and will need extra time to attend to them.
  • Bounding Box (BB) or upper limit: The upper limit on the project plan before which the project has to be finished under any circumstances – Generally decided by the top management based on product/services roadmap and launch in the market.

Under ideal circumstances, any project is scheduled to complete by NRA date. Considering some risks that may come on the way and would eat some time off the schedule, the project should be over by RA date. If the risks were not envisioned and hence not planned well, then project may get delayed and would complete after RA date. Project completion crossing the RA or upper limit is neither good nor expected out of a well-planned project.

Root Causes

As we always plan for a project to get over before RA date, seldom is the case it happens as expected. There are multiples reasons for schedule slippage, right from improper planning, lack of resources to unplanned requirements and rework that eat away vital time off the planned schedule.

A typical project development process – Each project will have a team (development, testing and other functions) that will work through a process (requirement analysis, schedule estimation, design, implementation and testing) to deliver a product to the customer/end user. Each entity that participate in the project – directly or indirectly affect the schedule.

From the development process, we can identify the items that can cause delay in the execution of the project – for example, misinterpreted or unclear requirement adds up to completion time, unavailability of development tools or resources can prolong the project duration. Various processes like schedule estimation, detailed design and product development if not executed skillfully, may significantly blow up the project cycle.

For better understanding all these possible causes that may result in schedule slippage are categorized .

Let’s have a detailed look at the root causes of schedule slippage category wise.

1) Schedule Estimation: “The key is not to prioritize what’s on your schedule, but to schedule your priorities.” – Stephen Covey

For a project to be executed on time, it is very important to have it planned very well. Any mistake in project schedule estimation reflects as delay in the project completion from its deadline. There are several factors that contribute to improper schedule estimation:

· Underestimation of technical complexities: At the start of the project, many of the team members may not have thorough knowledge of technical complexities and hence their estimation would be incorrect. Sometimes it may so happen that the person giving estimates for a particular task is having no idea about the technical challenges involved in carrying out that particular task. You might hear, towards the mid/end of the project life cycle when the task is not finished on time – “Oh, I didn’t know that this feature also requires 5 more tasks to be done!” or “I was thinking this task to be so simple, but I under estimated it!”. · Lack of Design/Big picture: It is important to have a bigger picture / overview of the complete project to understand how a particular module/feature would fit in to complete project. Product or system level design helps in understanding the interfaces among other modules and the required coordination for product assembly and hence, a better insight into the work involved. Often, estimates without focus on detailed design tend to deviate more from the actual time taken for finishing the job. · Integration Testing: While making a project plan, testing also needs to be accommodated in the schedule. At times, the unit testing or testing done by individual contributors on their module is taken into account but not the system level testing. Toward the release, when all the individually tested modules are brought together, a system level or integration testing is a must. Having the time for integration testing not accounted in the overall project schedule will cause delay in the project completion.

· Unplanned dependencies: Project planning is not only about breaking the project into minute tasks and managing them. A well-planned project schedule also needs to consider certain unplanned dependencies. Some of these are:

o People: Optimum utilization of human resources calls for same set of people working in multiple projects. A person may not be available to work for currently planned/assigned project due to extended/unplanned work in another parallel project. Another issue related to people could be unplanned/unexpected attrition that will affect the project plan. Time is also lost in mentoring of new member by a senior (more experienced) person which goes unaccounted if not planned.

o Tools & Equipments: Project can be delayed if team is waiting for release of upgrade or procurement of any vital tool (hardware or software being used in the project) or if the equipments required for development and testing are not available. “We had a 3-months project for validating our existing solution on new product platform using customer DUT (device under test). We had to wait for the DUT for nearly 1.5 months as it got stuck in customs. After getting the DUT, we realized that it’s been damaged partially during transportation. As a result we had to ask for another DUT and whole project took more than 5 months to get finished.” – I am sure that such cases will be quite familiar to many organizations. Other reason for timely unavailability of tools / equipments is that they are shared among various projects to reduce the operating cost. Any unplanned dependency on their usage or wrong assumption about availability of these shared resources would cause delay in the program. Team members might have to work on shifts to optimize the usage of shared resources which can cause reduced work hours and/or productivity loss and results to schedule slippage.

“I was waiting for Matlab license to be released by another person in the team but he left the office without doing so and I lost 3 hours figuring out what to do?” – is it something you faced before?

o Other programs: If multiple programs have deliverable dependencies, then delay in one project will have cascaded effect on other projects, which directly or indirectly depend on its deliverable. “We got delayed because we had to wait for a critical UI component from the framework project team” or “We didn’t plan for bug fixes for a component which was supposed to be delivered defect free for our usage” are the common scenarios for delays in program which are dependent on other program deliverables. Parallel programs may affect the schedule of your program in a different way as well – Sometimes, management changes the priority of the programs running in parallel. If your project is considered as a low priority one then there might be lack of resources assigned to your project that may result in schedule slippage.

· Beta releases: How many times we seek feedback on our product during development? And how often we allocate time for it? It’s important to plan beta releases if we desire to have our product validated by expert users or lighthouse customers during development. Getting feedback from beta customers becomes important especially when their requirements echo that of a mass customer base. Process of giving workable releases to customers, collecting their experience, having their feedback analyzed, and then incorporating in the final product version takes significant time.

· Risk mitigation and plan B: Every project will have some or the other risks. These risks can be of varying severity and probabilities. While making project plan, it is important to treat the risk individually based on their severity and probability of occurrence. If high probable risks with higher severity are not planned with their mitigation plan (or plan B), they will have huge impact on schedule deviation from planned one. As in one of the previous examples quoted, getting a DUT on time for validation was a risk. Had there been a mitigate plan (plan B) like – Validate with other DUT or if DUT is not available here, let one developer travel to customer’s place and finish the validation on time, the schedule slippage would have been avoided.

2) People: Ultimately, projects are executed by people who may not be skilled or talented. Hence, looking for perfection in projects involving human beings may not be a feasible thought. Certain unpredictable and hence unavoidable issues under this category are:

· Poor leadership: Before thinking of project execution, it is project planning that actually would set the platform of success. Execution of the project depends on its team while planning is taken care by the project leader. The project leader is expected to have enough technical know-how to understand the project goals and to the details of the tasks involved. Poor leadership and superficial knowledge of assignments often results in invalid effort estimation and ad hoc task delegation causing stress and possible delay in project execution. People leading the team are also responsible for keeping the team spirit and motivation level upbeat. Poor personal commitment due to lack of motivation results in loss of productivity and may cause schedule to slip. Another reason that adds up to delay in projects is inability of leadership team to track the schedule progress and take the correction action.

· Attrition: If the project duration is large and job market is hot, it may be difficult to retain people in the project till its completion. Attrition may further delay the completion especially if the person leaving the job was in critical path. A person leaving the organization would leave a gap in the project that a new person may not fill immediately, which in turn causes sudden reduction in the task force.

· Learning curve: When ever a new person or team member is included in the project, he or she may require some time to understand the project to keep in pace with other members. Learning curve is needed for new team members, joining the team either due to attrition or due to any specific technical competency requirement. · Context switching: In smaller organization or groups where people work on multiple projects simultaneously, it is important to have some buffer for context switching. A person planned to work in project ‘A’ for two hours after a gap of two weeks, would take more than scheduled time to complete that task. Gap of two weeks and the fact that he or she was involved in other project would require some time for the member to get back to the context of current project. · Global development teams: In an era of globalization and outsourcing, it is common these days to have development team distributed over different geographical regions. Project plan needs to account for different time zones and working culture. You might expect an input for your task on Monday morning your time but it may be Sunday late evening for that person and finally when the input arrives, you might be on your way to home after work.

Sometimes schedule estimation might go completely wrong if you have not understood the work culture of the region your teammate belongs to – “In my previous work, I was given a task to be completed with a heads up that its very critical task and needs immediate attention’. When I asked my project lead how many days/hours I have for it, I had been time for 2 weeks for high priority and ‘immediate-attention’ work.” Definition of ‘urgent’, ‘high priority tasks’ changes with culture and region.

· Communication Issues: People communicate differently. If important issues are not brought to the notice of the team members, or are not escalated on time, the entire project may suffer. Often fear of embarrassment stops team members from reporting issues faced during execution leading to more time being spent on that task that can easily be executed additional help.

3) Customer Involvement: These issues are quite serious if customer or end users of the product are involved in the development phase. Understanding customer’s priorities, defining your expectation from their involvement needs to be clear and in agreement with both the parties.

· Expert user testing: In the beginning of the project, expert user testing cycle needs to be planned. Process of giving builds or releases for testing and collecting their feedback, analyzing and incorporating them in your product takes significant time which, if not planned, can delay your program. · Timely feedback: “I got feedback from customers for features, delivered in development milestone-1, after milestone-5 towards the release. These feedbacks are critical but now I am worried how to incorporate them without affecting the schedule.” It sounds like a common problem. Incorporation of feedback from customers needs to be planned well taking a commitment from the customer. · Product requirement specification review: Having a product requirement review planned and executed will keep you on right track throughout the project. Reviewing the requirement specification will avoid requirement related defects fixing which otherwise would have delayed, the project.

4) Ambiguous Project Requirement: For any project to be initiated, the first thing is to have requirements for it. In the product development life cycle, requirement phase acts like a foundation. Clear requirement or vision for the project navigates the team to success. However, requirements may not be clear at the time of estimation and may result in delay in the project completion. Issues related:

· Evolving specs: If you are making a product based on a standard which is not yet matured or still evolving, you are more prone to have this risk. Frequency changes in the specs will change the requirement for the project during different stages of product development and team will continue to work on something that is not yet evolved. This results in rework that would delay the project if time for dealing with these changes is not accommodated in the schedule. “We developed an algorithm and hence measurement that was based on certain industry standard. Towards the release of the product, the specs changed and our measurement was no more valid. We had to redo the algorithm to reflect the changes in the specs. This caused our product release delayed by 2 months.” · New requirements: Sometimes new requirements are added as the project evolves towards completion. Implementation of new requirements is not planned at the beginning of the project and hence is not accounted in schedule. Adding new feature without revising the schedule may result in delay.

· Untold expectation: Requirements from the customers may be of two types – implicit or explicit. It is important to have the requirements well documented. Implicit requirements needs to be better defined and documented to avoid any confusion towards the end of the project. Customers may not describe their requirements related to system performance, memory issues, user interface quality and usability but they are very keen on providing feedback in those aspects once the product is given for expert user testing. If we are not clear about such requirements, out design might not address them. Addressing them towards the end of the project may call for design changes and extra work that would delay the project.

5) Unplanned Tasks / Reworks: Bounding box for the project is set by higher management and often lack buffer for unplanned task(s). Having more of unplanned task that creep up at different phases of project can cause schedule slippage. The unplanned tasks or rework may arise due to:

· Sustaining work: In smaller organizations, some of the project team may also be responsible for sustaining / customer support of existing products. These unplanned tasks, which come on event basis, related to customer support are always of high priority. Excess or prolonged sustaining work may take resource out of the planned project causing a potential threat for schedule slippage. · Defect fixes: Defects are bad as they degrade the product quality and consume extra time/effort to fix them. It is good to have testing of the intermediate releases of the project to find and fix defects sooner in the development life cycle. If the fixing-cycle for such internal-milestone defects is not planned, then either the project is either going to slip or product is going to be of poorer quality. Poor programming skill of the team, not adapting to modern programming practices and having ad hoc development processes may lead to higher number of defects which would take more time to fix then planned and cause slippage.

· Task spillover from previous milestone: Tasks that are not completed in previous milestone, due to whatever reason (inefficiency, vacation of the team member, resource crunch etc), will have to be completed in the next milestone thereby increasing the load on the team. If adequate buffer is not planned, these tasks spilled from previous milestone over to next, can delay the project. · Requirement change / refinement: Requirement changes during the product development will result in rework of what has been previously done with first version of requirement(s). Addressing changes in the requirements needs extra time and effort and may cause schedule slippage. In some cases, the requirement from customer is misunderstood resulting in wrong system design and implementation. Additional, unplanned time is lost in correcting the design/implementation which causes schedule slippage.

Conclusion

On time delivery is the challenge software development companies are facing globally. To have a complete control over estimated schedule, it is very important to identify the elements in the development cycle that cause schedule slippage. This article uncovers and explains the root causes of delay in programs using examples from real world. Having an insight to the root causes will help the program managers to make good decisions to avoid future schedule slippage.

Posted in general | Comments Off on Schedule Slippage – Root Causes

Review of Takeoff Software for Estimating Construction

So often people want to rush out and buy estimating software or takeoff software without first trying to define their internal estimating processes. Once the estimating process is clearly defined, then and only then, can you actually try to compartmentalize the process into segments. So often the segment is really quantity takeoff. Takeoff of what you may wonder? That is like the million dollar question. This article will speak about the takeoff software process which usually associated with estimating software processes. The takeoff software process can often be takeoff of materials for some folks, and to many others, the takeoff process of scoped systems to create estimates or proposals. This review or comparison will not try to explain the estimating software process but bring to you valid quantity takeoff thinking among estimators in a quest to find which product thinks the way you do. These are the opinions of the author.

I will review and compare 3 types of measuring takeoff products:

It is extremely important to note that these are ONLY measuring takeoff programs, NOT estimating programs.

1) Planswift

2) On-Screen Takeoff by On Center Software

3) Electronic Plan Takeoff Software

All three products have their strengths, however, Planswift and On-Screen Takeoff are stand-alone products and Electronic Plan Takeoff is actually dynamically integrated live with Microsoft Excel which means that it starts and finishes and saves in Excel. They all integrate with Excel, however, you will have to evaluate your thought process and decide which of the three products work-flow think along the lines of how you think. For instance, what is the first thing you do when you get a set of plans? Typically, you start flipping through the plans to see how involved the project is and what type of work do you see that is attractive for your company. Then when you decide you are going to estimate this job, more often than not, you start like 80% of companies in the world of construction estimating by opening your takeoff master template Excel spreadsheet. You rename your spreadsheet to the new job or project and off you go performing takeoff. This is where the differences are:

In Planswift, you decide what drawing you are on and then you perform the measuring of an item you want to perform takeoff on the plan. Unfortunately, that is not exactly how an estimator thinks. Planswift does give you the ability to add a type of takeoff item on the fly by naming it and then perform takeoff of it; somewhat of a very manual and slow process. They also provide you with the ability of applying a type of assembly to a takeoff to aggregate quantities of items in that assembly. Not quite the way an estimator thinks. It forces you to jump to different screens which slows down the process. Typically, the main start of anyone’s takeoff process, or some may think of it as a checklist approach, is to start with your own spreadsheet of YOUR items. Those items can be material items or can be scoped assembly system items. Either way, by starting with a master spreadsheet say in Excel for example, many estimators think of this as a risk reducer, not to forget things they normally takeoff. Being that Planswift is a stand-alone takeoff program, it typically saves your takeoff images in Planswift instead of your estimate in Excel, if Excel is your estimating system. If you are using Excel, you have to manually save your takeoff measurement numbers in Excel and your takeoff images in Planswift or elsewhere, just not in Excel where the takeoff quantity resides. Again, if you want to integrate with Excel, they force you to either export or import takeoff items from Excel rather than being dynamically integrated live to Excel. They do however have the ability to dump the measured quantity from Planswift into any Excel spreadsheet or Word document. The main purpose or the primary focus of this program is measuring, therefore it does a good job at that function. Most of the other functions require you to jump around different screens, and essentially, you loose your thought of where you are. There are some features that attempt to address the estimating process, however, there are many features that are missing for Planswift to be a full fledged estimating system; it is NOT one. Planswift does integrate with the leading estimating system Sage Timberline, but the integration is weak. Since Timberline’s power is in assembly takeoff and where most estimators reside in Timberline, Planswift does not give the estimator the ability to add quantities of miscellaneous Timberline items or one-time items that need to added on the fly to an assembly while they are in Planswift at the Timberline interview screen, and while being in the measuring phase. Planswift does allow the deleting of assembly generated items as well adjusting assembly item quantities in a different screen. Again, to perform all that, you are forced to jump around to different screens. No assembly is ever perfect in any estimating system since project conditions are always uniquely different, therefore, having to add items to an assembly is extremely important. That adding of items and associated quantities is an absolute requirement any estimator typically has to do during the takeoff measuring and estimating phase; something that Planswift struggles with as related to Timberline Estimating. Planswift does allow the direct send of measurements to Timberline Estimating items and assemblies while in Timberline Estimating, just as you would do with the old digitizer measuring boards. Training, support and maintenance are extra for Planswift. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

On Center’s On-Screen Takeoff is the Grand Daddy of software takeoff products due to the fact that it has been around the longest. On Center recognizes that On-Screen Takeoff is primarily a measuring program. That is why they have a separate estimating program named QuickBid for those who want an estimating program. On Center does not try to trick you into thinking it is an estimating system. In On-Screen Takeoff, you also decide what drawing you are on and then you perform the measuring of the plan. BUT, before you start, you can load a master set styles of things you typically takeoff or measure from your own library. That process seems to be less complicated than that of Planswift. On-Screen Takeoff does give you the ability to add a type of takeoff item on the fly by naming it and then performing takeoff of it; somewhat of a manual and slow process as well. The program does come with many features that are primarily focused on simple measuring to advanced measuring issues all with attention to detail regarding easy navigation for the takeoff process. On Center does a very good job at that. However, there seems to be a disconnect of thought from an Excel spreadsheet items you may use for estimating and/or proposals. The integration to Microsoft Excel is not a dynamic live link, more like an after thought in my opinion. Yes, you can establish links to named styles to cells or ranges in Excel, somewhat rigid. But the question you will have to ask yourself, which will happen more often than not is: What do you do when you need to add things on the fly during takeoff and in an Excel spreadsheet? Again there will be manual associations you will have to establish with Excel which is another major slowdown. You have to manually save your takeoff measurement numbers in Excel and your takeoff images in On-Screen or anywhere you decide, except the takeoff images will not be saved in Excel where the takeoff quantity resides. This type of situation arises when a takeoff program is a stand-alone program. On Center’s On-Screen Takeoff has the best integration with the most widely used estimating system in the USA: Sage Timberline Estimating. It basically mimics the same interview process as you would do with the old digitizer measuring boards. By working directly with Timberline, On-Screen Takeoff allows the estimator to perform takeoff of a Timberline variable question and immediately returns back directly with the takeoff quantity in a Timberline assembly at the variable question. By virtue of this process, On-Screen Takeoff allows the estimator to continue his/her Timberline interview process in Sage Timberline Estimating by reviewing/massaging generated quantities, or adding items in a Timberline assembly as the estimator see fit. That workflow process gives full control to the estimator, good job On Center. Training, support and maintenance are extra for On-Screen Takeoff. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

This next system is ONLY if your estimating system or proposal generator is Microsoft Excel. Electronic Plan Takeoff Software is a plug-in for Excel. You start your spreadsheet, you perform the measuring takeoff, you may even add some more items on the fly all the while you are in the measuring phase in the Electronic Plan Takeoff program. When you are done, even if you added items on the fly, they automatically appear in your Excel spreadsheet. Excel is the control of everything. Your project is started in Excel, your takeoff is saved in Excel, the estimate or proposal is/can be produced there in Excel; one program, one place. Many takeoff programs interface with Excel somehow, but only Electronic Plan Takeoff is live linked with Excel, meaning all your Excel spreadsheet descriptions appear in the measuring takeoff program so you always know where you are in Excel. That is a huge difference in comparison to Planswift and On-Screen Takeoff. You can even change a description of a takeoff item in Electronic Plan Takeoff and it is automatically changed live, in your Excel spreadsheet. When you talk about the estimating and takeoff phase you must keep processes cleans and easy and this program does just that. There is no getting lost in this program. Just like the other reviewed programs above, the central focus of this program is takeoff measuring, and it does a GREAT job at that. The navigation within the program is really simple and easy. It is not made to work with other estimating systems, but there is a version that allows the direct send of measurements to any Microsoft Windows program awaiting a keyboard entry, just as you would do with digitizer measuring boards. There is also a version that works with digitizer boards as well. If you use Microsoft Excel for estimating, or takeoffs, or proposals, then this Electronic Plan Takeoff program for Excel would be your best choice. The integration to Excel is unmatched in Electronic Plan Takeoff compared to Planswift or On-Screen Takeoff. What is quite different in Electronic Plan Takeoff is that training, support, and maintenance are INCLUDED with a purchase, whereas training, support and maintenance are extra for Planswift and On-Screen Takeoff. Moreover, annual support and maintenance for Electronic Plan Takeoff year two and beyond is a low fee per company per year, instead of per license. On-Screen Takeoff by On Center Software, and Planswift charge their annual maintenance and support fees per license (mandatory) which costs the end user more expense annually especially if a customer has more than one license.

Microsoft and Excel are registered trademarks of Microsoft Corporation. Planswift is the registered trademark of Tech Unlimited, Inc. On-Screen Takeoff and QuickBid are registered trademarks of On Center Software, Inc. Sage Timberline Office, Sage Timberline Estimating are registered trademarks of Sage Software, Inc.

Posted in general | Comments Off on Review of Takeoff Software for Estimating Construction

How to Repair DBF Files by Using DBF Recovery Software

As a computer user you must have heard about a DBF file or some of you have used it. DBF is a database file format used by various database software programs, such as: Visual FoxPro, Clipper, dbFast, CodeBase, MultiBase, dbXL, Arago and similar database programs. A database file is a collection of data organized in a tabular form. A DBF file can be easily opened, edited and saved by any of these database programs therefore, this file format is very popular among computer users.

The most common use of a database file is to store a large amount of data and information. The file is widely used in almost every sector, such as: corporate and educational sectors to store the data and information. It has become an essential file format for an individual and an organization.

Where this file format is very useful for users on the other hand, it may create some serious problems as well. Sometimes a DBF file may become inaccessible or invalid due to corruption. DBF is not immune to corruption; in fact, this file format is prone to corruption due to its large size and complex file structure. It might be easily corrupted due to various reasons, such as: virus attacks, malfunction in database application, hard disk drive failure, software collision, unexpected cancellation of DBF, human errors and many more. These are some common reasons which can play an important role in database file corruption.

While opening a corrupt DBF file you may receive some error messages something like these:

  • “File .dbf does not exist”.
  • “The fields in table did not match the entries in the database”.
  • “Access to table disabled due to previous error”.
  • “Database file appears corrupt: Page is of wrong type.
  • “Corrupt table”/ “index header”.
  • “Filename .dbf has become corrupted”.

These are some common errors which frequently take place at the time of corruption. For example: you are working on your DBF file, everything is fine. But all of a sudden your database application (Visual FoxPro or other) starts hanging. You have no other option other than restarting the system. But when you restart your system and open the same DBF file, in which you were working earlier, it does not open or you get an error message saying the file is corrupted or damaged. This must be very frustrating situation for any user since all the hard work will go into the vain. All the data and information stored in the file might be lost forever. You have to re-create the file, which might not be possible in some cases.

In such critical state a BKF file will definitely help you. If you have backed up the database file (which is now corrupted), then you can easily restore it from the BKF file. But sometimes the BKF file may not be available or corrupted or invalid. In this situation you can use third-party DBF recovery software. This is one of the most efficient and effective solutions to fix corrupt DBF files. The DBF recovery software is designed to repair an extremely corrupted DBF file and to restore maximum data from it. It is highly capable to resolve or fix all the errors from corrupted DBF files. The software supports all popular database applications, such as: dBase III, dBase IV, dBase V, Visual FoxPro, Clipper, dBFast, CodeBase, MultiBase, dBXL and Arago. The best feature of the software is its self-describing user interface. It requires no technical knowledge or skills to use this software. Any tech savvy and a novice user can easily and comfortably use this software to repair corrupted DBF files. The DBF Recovery software is available with free demo version. Users can download the demo version before buying the full software. This helps users to examine the features and performance.

Posted in general | Comments Off on How to Repair DBF Files by Using DBF Recovery Software

Different Types of Hospitality Management Systems

Hospitality management systems are the software that runs your hospitality business. From the food ordering system in your restaurant, to online accommodation booking software, it enables efficient communication and management of your operation, ultimately increasing revenues.

With a range of hospitality management systems to choose from, understanding what is offered is important in order to find the right system that is tailored for your needs and budget. Depending on the type of operation you manage, you should consider the following systems, their advantages and suitability to your company.

Accommodation management software:

Accommodation software packages range from those aimed at B&Bs and small motel owners to ones for running big hotels, clubs and resorts. The basic package offers simple guest and room management, while the more complex ones cover every aspect needed to manage and run a big hotel chain. This includes reservations, service, retail, inventory, staff roster and training, accounting and much more.

Front desk: A front office software package should enable reception staff to keep track of all bookings, state of rooms, guest details and charges, coordinate restaurant reservations for guests, plan housekeeping duties and process guest check-in and check-out. They should also provide a means to communicate effectively with all travel agents and activity operators linked to the system. Features you should look out for include: Reports for arrivals & departures on a specific date. Guest ledger and reservation details, including activities and special requests. Room rates, discounts, package deals, group bookings, etc. Visual schematic of hotel rooms and status. Visual schematic of calendar with room availability. Facility for printing check-in cards for guests. Flexibility in re-assigning guests to different room. Facility to easily add charges to rooms from restaurants, spa, gift shop, etc. Incorporate all payment options upon check-out and print receipt. Print work roster for staff Facilities for storing guest history Communicate efficiently with reservation and travel agents

Housekeeping/maintenance software: Easy-to-use software for the housekeeping and maintenance departments of your accommodation place will increase the efficiency of cleaning and servicing of rooms. Main features of this module will be: Keeping track of room status – dirty, cleaned, inspected, check-ins and check-outs, etc. All information such as number of guests, number of beds, length of stay, special requests (e.g. baby cot, high chair) should be visible to both housekeeping staff and management. Staff can enter maintenance issues as they arise, and those are automatically sent to the maintenance department. Staff can request cleaning materials and toiletries ordered. Staff can keep track of laundry status for uninterrupted linen supply.

Online reservation system: This software package is essential to any accommodation place. It helps you increase direct online bookings instantly. Prospective guests can view hotel rooms (size, choice of beds), availability and prices, plus services and facilities offered. The systems should have instant confirmation of credit card payments or other secure online payment method. After payment of deposit and confirmation by email, guests should be able to login to view or change their reservation details. Cancellation policies should be stated, airport transport options mentioned.

Hospitality management systems for point of sale (POS) operations: This includes restaurants and bars, the hotel gift shop, spa, tour desk and other guest services. It should have the options of direct payment or charge to room. Apart from recording normal vending operations, it should include issuing daily transaction reports to management or the accounting office, and a daily revenue report.

In the POS sector there are many operating hospitality management systems catering for the food vendor sector, namely restaurants, cafés, takeaway shops and delis.

Restaurant (POS) management packages. For POS management packages, you have the choice of an off-the-shelf system for restaurants and cafes, where you can set the options that suit your operation, or a customised one, specifically configured for your business. Most systems are quite easy to use and are cost effective. Their features vary, but most offer the following: Order taking, tallying, and cashier options using a hand-held PDA system. Credit-card processing interface Receipts customized for your business. The more advanced systems also offer: Integrating all transactions with your accounting software. Full inventory/stocktaking facility Translation facilities to selected languages.

Administration software: This module is directed at top management and offers access to all levels of the organization. It provides instant access to the data base of all sectors, ensuring total transparency of operations Overseeing and early intervention by senior staff can prevent mistakes being made by inexperienced employees and save money and the reputation of your business. · Other facilities in this package may include:

Tools for setting different rate systems for rooms and services: daily, seasonal, special promotions, etc. Statistical data – percentage occupancy over set periods, and other data used for policy making and customized reports for board meeting presentations. Organizing promotions and package deals. Inventory for different departments. Employee accounts and employee training programs

Remember: with the high staff turnover common to the hospitality industry, it is important to choose a system that needs minimal training to use, and has ‘secure areas’, which only authorised personnel (with the proper clearance) may access and use.

Choosing and introducing hospitality management systems for your business is a significant undertaking, both operationally and financially. But once up and running, the system will increase efficiency, cut costs and improve the service in your company. You will have happier staff and happier guests, who will promote your business and ultimately increase your revenue.

Posted in general | Comments Off on Different Types of Hospitality Management Systems

Different Types of Computer Repair Services

Our dependency towards technology is increasing day by day. Even a minor problem in the operating system disrupts our life and hampers our work. With the development of new technology, there also comes many technical problems such as virus infections, spyware attacks on the operating system, networks issues, and hardware failures. Therefore, fast and efficient troubleshooters are always needed to fix all your technical problems without disabling your work.

With the indispensable use of computers in our daily lives, we can not imagine encountering an issue that will leave us without our personal computers thus; We seek to have the computer service immediately. But due to the busyness of life, it is not possible for us to go to a computer service centers every time and get the system repaired leaving you days without a computer. Seeing today's need, there are many efficient and fast troubleshooters available online that will solve your problem in a fraction of time. Many of us do not understand need for professional computer repair services and try to solve the system related problem by themselves. Before going to any of the computer repair service sites, it is very important to be aware of the various types of services that are offered by the computer repair service centers:

1. IT services like network installation and configuration (LAN / WAN setup).

2. Virus & spyware removal. Installation of anti-virus software for a proactive approach to external attacks.

3. Hardware repair: Laptop / Mac / PC, printer, scanner, motherboard; CD / DVD ROM installation etc.

4. Problems related to Website development and presentation, graphic designing

5. Firewall and email security setup.

6. Windows OS installation and troubleshooting

7. Data backup and recovery

8. Tutorials to employees for solving small problems in-house

So, These are some of the services offered by the service providers. Before hiring any of the online computer repair services, it is very important to check the various types of services offered by them. So that you do not need to switch to different computer repair services sites for different services. It is also very important to check that there is a team of expert technicians for solving computer related problems individually, as this will help in solving the problem fast and efficiently. It is better to switch to such online computer repair services that you avail with the guarantee of fixing the problem fast else money back. As such, promises will pressurize the technicians to work efficiently and fix the problem quickly.

Posted in general | Comments Off on Different Types of Computer Repair Services

Microsoft Access and Medical Private Practice

For physicians medical office software installation could be nerve-wracking, not because they want to avoid electronic medical records, but because the majority of the software packages are too complicated and very expensive for them.

The good news is, you can make your medical office software system uncomplicated and relatively easily maintained with one of the popular database software packages being used today, the Microsoft Access.

Microsoft Access is a relational database system developed by Microsoft. Microsoft Access is one of the easiest and most flexible database management solutions for the medical office and provides data validation and user-friendly features on data entry screens. It has been the dominant lightweight database system used for the last decade and has continued to grow with additional features. Access is a productive and very customizable solution for small medical practices and comes with MS Office (or standalone). However the next step up in a medical environment would be MS SQL Server but small medical offices usually only has need of a lightweight application and the added functionality with MS SQL Server, comes with a heavy price.

With this relational database system you can be up and running in one hour, which means that it is not necessary for your practice to spend lot of money to purchase, configure, update and maintain an SQL Server solution. Microsoft Access includes without any additional costs, points of integration with popular software packages including: Microsoft Word, Excel & Outlook and provides a free runtime version.

MS Access network setup is very easy. A medical office with 2-8 users is up and running within ten minutes, while installation and application maintenance is extremely simple. Virtually any user with a basic knowledge of Microsoft Access can handle all maintenance procedures without the assistance of IT personnel.

Keep also in mind that SQL Server is the flagship database system from Microsoft and it is suitable for use in environments with up to thousands of users. Microsoft Access can handle 2- 8 users and it is limited to 2 GB data storage.

We are convinced that the best way for private medical offices around the world to enter the world of electronic medical records is to purchase a professionally designed but inexpensive and affordable Microsoft Access based software solution.

Posted in general | Comments Off on Microsoft Access and Medical Private Practice

Texas Two Step Strategy – Everything You Need to Know

The Texas Two Step lottery is a great example of a game that is both strategic and fun. The state lottery is an excellent arena for you to shell out your extra dollars while learning about alternative lotto mechanics. In the state of Texas, the Texas Two Step is considered to be the most popular form of lottery. The game beings when an individual is asked to pick four number from and in between 1 to 35. Like most lotto types, this also has a bonus ball number, which can increase your chances of winning. The grand price for this unique game does not go below two hundred thousand dollars so long as you make five matches. If you are also quite hesitant to pick your own number, the quick pick system also applies to the Texas Two Step lottery. A multi-draw feature also allows you to bet for ten advance drawings at once by simply making a distinguishable mark in the designated ticket boxes. Single plays cost only US$1 each and can reflect winnings up to a hundred thousand dollars.

Most lottery systems base on luck as foundation for winning. Unfortunately, even with the convenience of quick picks and other strategies, chances of winning are still small. One effective way to increase the chances of gaining back positive results from your chosen number is by adhering to the Wheeling Systems. Generally, wheeling systems do not guarantee an automatic win after placing your number picks in the Texas Two Step. However, the mechanism gives you more chances of bringing home multiple tier prizes as opposed to you simply randomly selecting the number, or relying on quick picks. The odds of winning the Texas Two Step prize are statistically ranging from 1 to 32. The overall ratio of victory can be quite unsatisfactory if played with mere dependence on luck. Although you can win $5 for simply matching the bonus ball number, naturally, anyone would still want to vie for the grand prize.

There are also a handful of lotto software that provide good combination numbers for players. Most people confirm the effectiveness of most online programs in tracking the best numeral combinations for lottery. You may program these to suit your needs and according to the type of lottery that you participate in. For Texas Two Step, it is much easier to use a software to calculate possible combinations as it has lesser selections or numbers compared to most lotto games.

For serious lotto players, individuals simply log onto the website and place their bets randomly. Sites also offer a few tips and strategies on how to best employ their gaming techniques. You may be able to view advices on when is the best time to place your bets and how to purchase your tickets quickly. Other websites also present lottery news, which is also an effective way to keep track of your bets. Bear in mind that in order for a player to achieve positive results while playing lotto, the correct strategy and technique must put in place so as to lead you to triumph and victory.

Posted in general | Comments Off on Texas Two Step Strategy – Everything You Need to Know

Futon Frame Maintenance and Common Replacement Parts and Hardware

A little preventative maintenance of your futon frame can greatly increase how long it lasts. We recommend checking the bolts on your futon frame every month or two, depending on how often it's used. If they are loose, gently tighten them, but be careful not to over tighten them. If you have a wooden frame, you can rub a bar of Ivory soap in the arm tracks every now and then, to keep things operating smoothly.

Most of the damage that we see is from forcing the frame to operate, when it's stuck. If you are converting your frame from a bed to a sofa, or from a sofa to a bed, and it does not easily convert, stop what you are doing, and remove the mattress, and carefully examine why it's not moving easily. Usually if you try to convert the frame and you pull on one side more than the other, something will jam, and if forced, you may break something.

Normally a guest will try to make their bed in the morning, and not knowing how to do it, they may break your frame. We suggest telling your guests to leave the futon as a bed, and you'll take care of changing it from a bed to a sofa for them.

Some parts wear out, and some of the plastic parts can dry out over the years. If the bolts are not tightened, a part can move around in a way that it's not recommended to, and that can cause it to break. People ask us why they do not make some of the parts in futon frames out of metal so they're never break. The reason is, if they were metal, and something jammed up, and was forced, the seat, or back, or an arm would crack, and that would be a more costly repair.

Here's a list of some of the more common futon frame hardware and parts. This is by no means a complete listing of all the parts, but it includes most of the common parts. Some items are called more than one name, so we list them twice. Futon store that has been around a long time, might even have obsoleste parts that you might need.

If you need a part that you can not find anywhere, consult a good futon store who's willing to help you, and give them a description and a couple of pictures showing what you need and see if they are willing to help you. They may need to know the name of the manufacturer of the frame because there are many frames that look the same, but the size of the bolts or seat decks and other items will all be slightly different.

Futon Bolts
Standard Futon Hinges
Click Click Hinges
Triple Click Hinges
Futon Mattress Storage Bags
Oblong Rollers
Carriage Blocks
Round Futon Rollers
Double Futon Rollers
Nylon Roller Inserts
Futon Barrel Nuts, Nuts, and Cross Dowels
Larger Futon Barrel Nuts
Futon Seat Stoppers
Futon Storage Bags
Allen Wrenches
Larger Allen Wrenches
Plastic Leg Caps
1/2 "Futon Hardware Sets
5/8 "Futon Hardware Sets
Angle Support Brackets
Decorative Bolt Covers or Plugs
Clevis Pins and Assemblies
Various Plastic Rollers, Glides and Carriage Blocks
Stretcher Support Rails
Futon Seat Decks
Futon Back Decks
Futon Arms
Cotter Pins
Washers and Clips
Futon Slats and Supports

Posted in general | Comments Off on Futon Frame Maintenance and Common Replacement Parts and Hardware